User manual

- 42 -
 Time /set time /
Press active display field to set time in format visible in the top
bar of the display. After setting time, accept it by pressing OK
button.
For instance 11:23:32 >> requires entering time as: 11.23.32
and pressing <OK> button.
Caution:
Incorrect time values shall be ignored by the software, remaining the time
unchanged.
 Date
Press
active display field to set date in format visible in the top
bar of the display. After setting date, accept it by pressing OK
button.
For instance 10 February 2010 >> requires entering date as:
10.02.2010 and pressing <OK> button.
Caution:
Incorrect date values shall be ignored by the software, remaining the time
unchanged.
 Show time
Press active display field and set option YES if time indicator
should be visible in the top bar of the display, or select NO.
 Show date
Press active display field and set option YES if date indicator
should be visible in the top bar of the display, or select NO.
Note:
Date and time settings are also accessible from the software’s main display
level. Press field with displayed date and time to enter their settings mode –
for more details see chapter 8 of this user manual.
18.4.6. Printouts – standard printout template
Menu printouts contains two separate sections. The first one is the standard printout
template, and the other one enables designing non-standard printout templates.

Standard printout
comprises three internal sections featuring different variables. For each
variable set option YES to include it in a standard printout template. If option
NO is selected, then the variable is disabled, i.e. it is not printed.