User manual

ManualsBrandsRADWAG ManualsKitchen AppliancesAS 3Y

Table Of Contents

1. BASIC INFORMATION
- 1.1. Intended use
- 1.2. Precaution measures
- 1.3. Warranty
- 1.4. Supervision over balance metrological parameters
- 1.5. Manual significance
- 1.6. Balance user training
2. TRANSPORT AND STORAGE
- 2.1. Packaging
3. UNPACKING, INSTALLATION AND COMMISSIONING
- 3.1. Installation and place of use
- 3.2. Unpacking
- 3.3. Balance cleaning
- 3.4. Plugging to mains
- 3.4. Connecting peripheral equipment
4. GETTING STARTED
5. BALANCE LEVELING
- 5.1. Level control system – automatic operation – “ALERT” mode
- 5.2. Manual leveling
6. MENU STRUCTURE
- 6.1. Working mode selection
- 6.2. Moving in user menu
- 6.3. Return to weighing mode
- 6.3. Quick return to weighing mode
7. WEIGHING
- 7.3. Use of constant tare in weighing
- 7.4. Applying automatic tare in weighing
- 7.5. Digital tare
8. BASICS ON TERMINAL AND SOFTWARE OEPRATION
- 8.1. Basics on balance operation
9. BALANCE SOFTWARE
- 9.1. Operators / User profiles
- 9.2. System settings
- 9.3. Working modes
10. BALANCE ADJUSTMENT
- 10.1. Adjustment report settings
- 10.2.Adjustment history
11. DISPLAY CALIBRATION
12. BALANCE USER SELECTION
13. PERIPHERALS
14. ABOUT
15. COMMUNICATION
16. UPDATE
17. LEVELING
18. BALANCE ADAPTATION – USER SETTINGS
- 18.1. Adding a new operator
- 18.2. Deleting a operator
- 18.3. Selecting a operator
- 18.4. Operator settings
- 18.5. Quick access to determining working modes parameters
- 18.6. Parameter of working mode WEIGHING – quick access keys
- 18.7. Parameter of working mode WEIGHING – information
- 18.8. Parts Counting
- 18.9. Checkweighing
- 18.10. Dosing
- 18.11. Percent setup
- 18.12. Animal weighing
  - 18.12.1. Internal settings of the animal weighing mode
  - 18.12.2. Animal weighing mode – manual mode of operation
- 18.13. Density of solids, liquid and air
  - 18.13.1. Setting a default function of the density determining mode
  - 18.13.4. Density of air
- 18.14. Formulations
  - 18.14.1. Designing a formulation
  - 18.14.2. Use of database of formulations in weighing.
- 18.15. Statistics
  - 18.15.1. Internal menu of Statistics mode
- 18.16. Mass Comparison
- 18.17. Differential weighing
19. ACCESS TO BALANCE PARAMETERS
20. TECHNICAL DATA
- 20.1. Balance MYA .3Y series
APPENDIX A – cooperation with EPSON printer
APPENDIX B – cooperation with KAFKA printer
APPENDIX C – cooperation with label printer CITIZEN
APPENDIX D – databases

- 44 -

BASIC PRINCIPLES OF USING PRINTOUTS

1. Press PRINT key on balance’s overlay to print variables that are contained in

section LINE of the standard printout template, and if they are attributed =

YES (see above list of variables in printouts).

2. Variables attributed as YES present in the HEADER and FOOTER are

printed ONLY on pressing Print Header or Print Footer soft keys located in

the bottom bar of the display.

Procedures for adding a soft key for an INDIVIDUAL USER of a balance:

− Go to user parameters (also possible

by pressing SETUP button on

balance overlay and pressing Users

pictogram)

− Select and press name of a user,

and after previewing functions

related to a user, go to an screen

previewing Units – Working modes –

Access

− Press WORKING MODES field. The

display shows all working modes

implemented in a balance.

− Select a working mode, e.g.

WEIGHING which is combined to a

process: Print Header or Print

Footer.

− Select field described as BUTTONS

− Set attribute of field print HEADER and print FOOTER to YES.

Return to weighing:

− Press return button for a few times

− Press and hold the SETTINGS

PICTOGRAM

(see point 6.3. Quick return to weighing

mode)

The bottom bar of the display containing the quick access keys will feature two new

pictograms: print header and print footer.