User manual

- 50 -
 Creating a non-standard printout
Balance 3Y series enables creating up to 5 non-standard printouts. Creating a
printout template is carried out by adding individual texts to a printout template.
PROCEDURE
- press “PRINTOUTS” field
- press “ADD” pictogram
- the display opens a window with a printout number
- enter a custom printout name /number and accept it
- a printout template is created.
Caution:
 Each following printout template has its individual order number, e.g. 1, 2, 3, 4 that can be
modified to an optional name.
- press field with a name of created printout template. The display opens a window
for adding texts to the printout
- press „ADD” pictogram and select a text to be added to the printout from a
displayed window.
- repeat the text adding procedure until completing a printout template.
18.4.8. Units

Press “UNITS” pictogram to select a basic
measuring unit and a supplementary (info)
unit for balance operation.
 The choice is made by highlighting a field
next to a selected measuring unit.
 The basic measuring unit is displayed next
to the measurement result.

The supplementary (info) unit is displayed
in the workspace area below the
measurement result
 A condition for displaying the info unit is
determined in menu:
− /working modea / xxx/ Information/ Info
unit: YES or NO/
Caution:
The balance enables determining up to 2 custom units
that can function as basic or supplementary units.
Determining the custom units is described in chapter
18.4.9. Working Modes.