User manual

- 51 -
18.4.9. Working Modes – general information
Function “Working modes” contains a list of all
working modes available in a balance. On
displaying a window with a list of working
modes, a user can:
− Select a default working mode
− Determine conditions for using a working
mode.
Means of selecting a DEFAULT working mode:
Each balance user can set their individual
default mode of balance operation enabled on
activating a user profile: mark a field ON THE
RIGHT SIDE of a working mode name
Determining conditions for using a working
mode:
press a field with working mode name.
Menu “Working modes” enables determining individual settings for each of the
working modes. The settings are assigned only to an active user. In order to
change working mode settings, first activate a required user profile, and then
change the settings.
Each WORKING MODE can have individual ACTIVITIES assigned.
Each activity can be attributed as:
ο YES /to be enabled and accessible for a user /
ο NO /to be disabled ant not accessible for a user /
Each WORKING MODE can have individual INFORMATION items
assigned. Each information item can be attributed as:
ο YES /to be enabled and accessible for a user /
ο NO /to be disabled ant not accessible for a user /
Apart from the above, each working mode features additional information items, that
determine means of using the working mode. These items and their description are
provided when describing each of available working modes.