User manual

- 56 -

Print button
Enables determining operating mode of «PRINT» button. Available settings:
ο “Stable“
Pressing the « PRINT » button causes printing of mass indication only
after it is stabilized.
ο “Always“
Pressing the « PRINT » button causes immediate printing of mass
indication, independently on the stability status.
ο
“Off“: The « PRINT » button is disabled.
 ID definition
Menu “ID definitions“ enables activating up to 12 codes that are accessible on
pressing a hot-key. The menu also enables changing the names of assigned
IDs.
Codes (“ID1 “ … “ID12 “):
If there are no codes defined, then press “ADD” pictogram which opens an on-
screen keyboard. Enter a new name for the ID and accept it by pressing
«Enter» button. Changing name of an already determined ID is carried out by
selecting field with its code name and entering a modified name. A name can
contain up to 15 alphanumeric characters. Press “DELETE” button to remove
an ID from the list.
Note: the codes are named as standard: “ID1“, “ID2“, “ID3“ …“. They should be replaced
by user defined names.
 Automatic tare
ο Enabled: YES / NO
ο Minimum mass: It is a mass above which the automatic tare function is
enabled.
 Weighing counter
ο Enabled: YES / NO
ο Quantity: determines number of weighments stored in balance memory /max
999/
ο Footer on zeroing
ο Zeroing after footer
ο Zeero statistics after footer
ο Max. quantity
 Tare
Menu “Tare“ enables determining or changing name and settings of maximum
10 tare values that are accessible on pressing a quick access key “Tare“.
Changing data is carried out by pressing name of a tare to be modified or
pressing « ADD » button to create a new tare. The process causes opening a
new window with on-screen keyboard for changing name of a tare. The tare
name can contain up to 15 alphanumeric characters.
Changing the tare value is carried out by pressing field with displayed tare
value which opens an on-screen keyboard for entering the new value of tare to
be stored in balance memory.