User manual

- 58 -
Below description contains only those quick access buttons that are not present in
working mode: WEIGHING.
On enabling the “Parts Counting mode” the
display indicates default set of pictograms for
immediate initiating work, i.e.:
− Set tare
− Enable tare
− Determine part mass /1 part/
− Determine standard quantity
− Database of standards
Set part mass
Pressing this hot-key opens a window with on-screen keyboard for entering
mass of a single part. Based on the determined part mass the balance counts
the additional parts placed on the weighing pan.
Numeric keyboard – description of buttons:
- DEL: delete last digit
- C: delete all digits
- OK. accept entered value
Caution:
Mass of a standard can be specified with
maximum 4 decimal places
Determine part mass
Mass of a single part is determined by its weighing. The parameter is saved
and displayed in the workspace area as “standard mass”.
Pressing this hot-key causes returning to
the weighing mode and displaying a
message in the BOTTOM COMMAND
BAR of the display. Place on balance
weighing pan an ordered quantity of
parts and press OK button.
To abandon press C button.
Caution:
The quantity of parts ordered in the
COMMAND bar to be loaded on the
weighing pan is determined by parameter
“Set standard quantity”.
PROCEDURE:
- press GREY coloured workspace area
- scroll to menu option “Set standard
quantity”
- press a field with name of this function
and enter number of parts required for
calculating mass of a single part
- accept entered value.