User manual

- 67 -
18.9. Checkweighing
Checkweighing is a process for controlling mass of a load. The load
has low and high threshold
s determined, these are the checkweighing
thresholds, marked as LO and HI.
Quick access keys displayed in the bottom bar relating to the checkweighing mode.
Set their attribute to Yes (present in the bottom bar) or No (absent).
Adjustment /yes – no/ Clear counter /yes – no/
Set tare /yes – no/ ID definition /yes – no/
Enable tare /yes – no/ Checkweighing thresholds /yes – no/
Print header /yes – no/ Database of thresholds /yes – no/
Print footer /yes – no/ Statistics /yes – no/
Non-standard buttons
Principle of use and function of the quick access keys has been described in chapter
18.6. of this user manual: Parameter of working mode WEIGHING – quick access
keys.
Other quick access keys function in accordance with the description provided in
chapter 18.7. Parameter of working mode WEIGHING – information.
Information items related to checkweighing:
o bargraph
o supplementary unit
o tare
o gross
o counter
o low threshold
o high threshold
o statistics /difference, amount, total sum, standard deviation, etc./
o ID codes
o non-standard data
o non-standard data project
Each information item features option YES or NO determining its displaying criterion.
CAUTION:
Defining non-standard information items is described in chapter 18.8.4.