User manual

- 71 -
18.9.3. Bargraph in checkweighing mode.
A bargraph is one of the elements of the workspace area. A criterion for enabling a
bargraph is setting its parameter to YES when declaring information items for the
checkweighing mode.
The acceptance field on the bargraph
depends on the current settings of the low
and high checkweighing thresholds.
Bargraph colours:
− yellow: mass below the low threshold
− green: mass within the set thresholds
− red: mass above the high threshold
18.10. Dosing
Dosing process is a procedure enabling measuring a product to a
pre-determined target mass. In case of laboratory balances, the
dosing process has a laminar character, therefore it requires disabling
the Autozero function for obtaining an actual measurement result.
CAUTION:
In DOSING mode, the display indicates the difference between mass placed on balance
weighing pan and mass value to be dosed entered to balance memory.
Quick access keys displayed in the bottom bar rare relating to the dosing mode. Set
their attribute to Yes (present in the bottom bar) or No (absent).
Adjustment /yes – no/ Clear counter /yes – no/
Set tare /yes – no/ ID definition /yes – no/
Enable tare /yes – no/ Checkweighing /yes – no/
Print header /yes – no/
Database of target mass values
/yes – no /
Print footer /yes – no/ Statistics /yes – no/
Non-standard buttons
Principle of use and function of the quick access keys has been described in chapter
18.6. of this user manual: Parameter of working mode WEIGHING – quick access
keys.