User manual

- 75 -
Use of Database of Target Mass Values
PROCEDURE:
o press Quick access key
o to open a screen with data saved
in the Database of Target Mass
Values.
o search and select a required
target mass record press field with
its name,
o the value of the target mass is
automatically enabled for use in
the dosing mode.
o the display indicates value of the
target mass preceded with MINUS
sign
o the balance is ready to work with
enabled target mass value .
Caution:
Increasing the displayed digits
automatically replaces the workspace area
including graphic representation in the
form of a bargraph.
o dose the product until the
indicated mass value is 0.0g
o the workspace area provides
additional data on the weighing
process.
o The information items displayed in
the WORKSPACE area is specific
for the dosing mode.
18.10.3. Bargraph in dosing mode
A bargraph is one of the elements of the workspace area. A criterion for enabling a
bargraph is setting its parameter to YES when declaring information items for the
dosing mode.
Bargraph colours:
− yellow: mass below the target field
tolerance
− green: mass within the target field
tolerance
− red: mass above the target field
tolerance
The result is recognized as correct if it is
within +/- 10% tolerance of the target
mass value.