User manual

- 83 -
5. Mass of weighed load was increased to
53,2g that is 106,4% of the reference
mass value.
The display status for this mass value
is mass excess (bargraph colour is
red).
6. – above the high threshold value.
Caution;
the tolerance of the high threshold is + 5% to
the reference mass and the display indicates +
6,6% thus the indication IS OUT OF the
acceptance field.
18.12. Animal weighing
Animal weighing mode is intended to determining mass of an object
that is moving on the weighing pan of a balance. Therefore, the
structure of the working mode, i.e. its algorithm for determining stable
mass indication.
After enabling the animal weighing mode, it is immediately ready to be used. Follow
the commands indicated in the COMMAND BAR of the display. After completing the
weighing process, the measurement indication is locked on the display. Internal mode
settings are editable using the QUICK access keys of the bottom display bar.
The Quick access keys displayed in the bottom bar relating to the animal weighing
mode. Set their attribute to Yes (present in the bottom bar) or No (absent)..
Adjustment Clear counter
Set tare ID definition
Enable tare Animal weighing
Print header Statistics
Print footer xxx Non-standard buttons
Principle of use and function of the quick access keys has been described in chapter
18.6. of this user manual: Parameter of working mode WEIGHING – quick access
keys.
Other quick access keys function in accordance with the description provided in
chapter 18.7.