User manual
Table Of Contents
- 1. BASIC INFORMATION
- 2. TRANSPORT AND STORAGE
- 3. UNPACKING, INSTALLATION AND COMMISSIONING
- 4. GETTING STARTED
- 5. BALANCE LEVELING
- 6. MENU STRUCTURE
- 7. WEIGHING
- 8. BASICS ON TERMINAL AND SOFTWARE OEPRATION
- 9. BALANCE SOFTWARE
- 10. BALANCE ADJUSTMENT
- 11. DISPLAY CALIBRATION
- 12. BALANCE USER SELECTION
- 13. PERIPHERALS
- 14. ABOUT
- 15. COMMUNICATION
- 16. UPDATE
- 17. LEVELING
- 18. BALANCE ADAPTATION – USER SETTINGS
- 18.1. Adding a new operator
- 18.2. Deleting a operator
- 18.3. Selecting a operator
- 18.4. Operator settings
- 18.5. Quick access to determining working modes parameters
- 18.6. Parameter of working mode WEIGHING – quick access keys
- 18.7. Parameter of working mode WEIGHING – information
- 18.8. Parts Counting
- 18.9. Checkweighing
- 18.10. Dosing
- 18.11. Percent setup
- 18.12. Animal weighing
- 18.13. Density of solids, liquid and air
- 18.14. Formulations
- 18.15. Statistics
- 18.16. Mass Comparison
- 18.17. Differential weighing
- 19. ACCESS TO BALANCE PARAMETERS
- 20. TECHNICAL DATA
- APPENDIX A – cooperation with EPSON printer
- APPENDIX B – cooperation with KAFKA printer
- APPENDIX C – cooperation with label printer CITIZEN
- APPENDIX D – databases
- 99 -
Printout example:
No. of measurements
1 from 6
A
500.001 g
B
500.045 g
A
500.001 g
Difference
0.044 g
Average difference
0.044 g
No. of measurements
2 from 6
A
500.001 g
B
500.046 g
A
500.001 g
Difference
0.045 g
Average difference
0.045 g
No. of measurements
3 from 6
A
500.001 g
B
500.046 g
A
500.001 g
Difference
0.045 g
Average difference
0.045 g
No. of measurements
4 from 6
A
500.001 g
B
500.050 g
A
500.002 g
Difference
0.049 g
Average difference
0.046 g
No. of measurements
5 from 6
A
500.003 g
B
500.049 g
A
500.001 g
Difference
0.047 g
Average difference
0.046 g
No. of measurements
6 from 6
A
500.001 g
B
500.050 g
A
500.000 g
Difference
0.050 g
Average difference
0.047 g
Standard deviation
0.002 g