User manual

8
1. INTENDED USE
Weighing terminals PUE 7 are devices intended for scales ba based
scales mostly for industry. They are produced in two verssed on a strain
gauge and housing: plastic and rack mounted stainless steel. TFT 5.7”
colourful graphic displays with touch panels allows for intuitive operation
without using keys.
The weighing indicator is equipped with 2 USB sockets, 2 RS232 interfaces,
Ethernet and digital inputs-outputs 4I/4O. It can cooperate with barcode
scanners, receipt printers, label printers, transponder card readers,
and some PC equipment (mouse, keyboard, pendrive).
2. PRECAUTIONARY MEASURES
A. Please, read carefully this user manual before and use the device
according to its intended use;
B. Weighed loads should be placed in possibly central part of scale pan;
C. Do not clean the device with agents causing corrosion;
D. Weighing pan should be loaded with goods having gross mass lower
than maximal capacity of the scale;
E. Do not leave loads on the pan for longer period of time ;
F. In case of failure, immediately disconnect scale power supply;
G. Devices that are to be withdrawn from usage should be utilized
according to the law.
3. WARRANTY CONDITIONS
A. RADWAG is obliged to repair or change those elements that appears
to be faulty because of production and construction reason,
B. Defining defects of unclear origin and outlining methods of elimination
can be settled only in participation of a user and the manufacturer
representatives,
C. RADWAG does not take any responsibility connected with destructions
or losses derives from non-authorized or inappropriate (not adequate
to manuals) production or service procedures,