Manual

- 99 -
8. Printout [type of printout, label declared to a client]
19.5. Drying program
Database of drying programs contains saved data on drying parameters which
are activated to dry a product.
Procedure
• Enter submenu < Databases>, and press < Drying programs> field
• Press < Add > key to add a new program /profile to the data of drying
programs
• If a program already exists in the database of drying programs, press field
with its name to enter its editing mode.
List of parameters defined for a drying program:
1. Name
2. Code
3. Drying mode
4. Finish mode
5. Result
6. Printout interval
7. Start mass control
8. Equipment related to dried sample
9. Sample preparation
10. Recommended sample size
Parameters 8 to 10 are informative ones for informing a user on additional
requirements needed to dry a product (e.g. using a filter made of glass fibre,
using specific sample mass or means of preparing a sample for drying). The
descriptions are enabled on pressing one of the quick access keys <Sample
description> and enabling one of available drying programs.
19.6. Reports from drying process (Drying reports)
Database of drying reports contains data on completed analysis of moisture
content in a tested sample. Each report can be previewed, searched by date,
exported or printed.
Procedure
• Enter submenu < Databases>, and press < Drying reports > field
• Press field a desired record name, unless it is visible on the top of the list,
wind the list forward using navigating keys,
• Report’s name consists of date and time of its creation, e.g.
2012.03.12 11:12:15