Technical data

34
P1.1 iCAL – Internal calibration
start of internal calibration process, process is completely automatic without
interference of balance operator, if pan is loaded display will indicate message
about necessity of removing the load.
or CAL button
P1.2 ECAL – External calibration
calibration with external weight, which value is saved in factory menu of
balance, function unavailable in verified balances.
balances with internal calibration balances with external calibration
P1.3 tCAL - Test of calibration
comparison of internal calibration mass with its value saved in balance memory.
balances with internal calibration balances with external calibration
P1.4 ACAL – Automatic calibration (balances with internal calibration)
determination of factor, which should decide about starting the automatic internal
calibration
nonE – none of factors will cause start of calibration
tEmP – calibration with regard to change of temperature
timE – calibration with regard to time set in P1.5 CALt
both – calibration with regard to time and temperature.