Technical data

15.4.1. Format of sent data after pressing the PRINT button

Depending on setting of P4.5 PStb parameter only stable measurement or

mass of instantaneous mass will be sent.

For verified balance printout of temporary measurements will be blocked

for instantaneous measurements.

Format of printout

1 2 3 4 - 12 13 14 - 16 17 18

stability

marker

space

mark

mass

space

unit

stability marker – [space] if stable

[?] if unstable

[^] if there is an error of exceeding the range on +

[v] if there is an error of exceeding the range on -

Mark – [space] for positive values or [-] for negative values

mass – 9 marks alignment to the right

units – 3 marks alignment to the left

15.4.2. Format of sent data for orders generated from the computer

Bala

nce after receiving the command answers first:

XX_A CR LF – commend understood, realization started

XX_I CR LF – commend understood, but unavailable at the moment

XX _ ^ CR LF – commend understood, but max range is exceeded

XX _ v CR LF – commend understood, but min range is exceeded

XX _ E CR LF – error occurred while command realization – exceeded time limit

while waiting for stable result (time limit is characteristic

parameter of balance)

XX – name of command

And afterwards