Technical data

18
Name of function groups and their content:
P1 CAL [Adjustment/Calibration]
P1.1 iCAL | [internal adjustment]
P1.2 ECAL | [external adjustment]
P1.3 tCAL | [temperature adjustment]
P1.4 ACAL | both/nonE/tenno/tinnE [automatic adjustment]
P1.5 CALt | 1 h ÷ 12h [time of automatic adjustment]
P1.6 CALr | YES/no [report from adjustment]
P2 GLP [Good Laboratory Practice ]
P2.1 USr | _ [name of user]
P2.2 PrJ | _ [name of project]
P2.3 Ptin | YES/no [printout of measurement time]
P2.4 PdAt | YES/no [printout of measurement date]
P2.5 PUSr | YES/no [printout of user name]
P2.6 PPrJ | YES/no [printout of project name]
P2.7 PId | YES/no [printout of balance’s factory number]
P2.8 PFr | YES/no [printout of frames]
P3 rEAd [Main user parameters]
P3.1 AuE | Stand/Slouu/FASt [filtering level]
P3.2 ConF | FASt_rEL/Fast/rEL [value release]
P3.3 Auto | On/OFF [autozero]
P3.4 Ldi9 | ALuuAYS/never/uu_StAb [blanking last digit]
P3.5 rAPd | YES/no [weighing mode RAPID]
P4 Print [Data transmission – RS 232]
P4.1 bAud | 2400/4800/9600/19200 [baud rate]
P4.2 CntA | YES/no [continuous printout in basic measuring unit]
P4.3 Cntb | YES/no [continuous printout in current measuring unit]
P4.4 rEPL | YES/no [manual or automatic operation]
P4.5 PStb | YES/no [result printout: stable or unstable]
P4.6 Lo | 000.0000 [min mass threshold for automatic operation]