Manual

Return to weighing:
See 11.3
24.8.5. Chute time delay
In <P7.4.5 CHUTE TIME> users can set an additional period of time
that is counted down after mass reaches the level below LO value.
Procedure:
• Enter <P7 WORK MODE> and then:
Using numerical keys inscribe the required value (0 to 60 s)
and confirm it with
.
Return to weighing:
See 11.3.
24.8.6. Automatic printout of report
Every dosing / filling procedure may be terminated with printing
reports that sums up the process.
Procedure:
• Enter <P7 WORK MODES> end then:
- 112 -