User manual

No
Parameter
name
Default
settings
Description
P1 rEAd - Mains parameters
1.1 Fil
3
Setting a filtering level
1.2 Auto YES Control of balance’s zero indication
1.3 tArA no Enabling / Disabling tare function
1.4 Fnnd YES Median filter
P2 Prnt - RS 232 parameters setting
2.1 Pr_n StAb Printout type
2.2 S_Lo - Minimal mass threshold
2.3 bAud 9600 Baud rate
2.4 S_rS 8d1SnP Serial transmission parameters
P3 Unit - Supplementary unit settings
3.1 StUn g Change of measuring unit: [g] or [oz]
3.2 FLUn
°C Change of liquid (water) temperature unit: [°C] or [°F]
P4 Func - Working modes
4.1 tnnP -
Declaring liquid (water) temperature in [°C]
4.2 dEnS - Declaring solution density in [g/cm
3
]
4.3 F-K - Testing gold alloy
4.3.1 out K-1
Selecting gold alloy (K-1: gold / copper / silver;
K-2: gold / copper; K-3: gold / silver)
4.3.2 rtK 7 : 3 Copper and Silver % ratio
4.4 F–P P-1
Testing platinum alloy – alloy selection
(P-1: platinum / nickel; P-2: platinum / palladium)
4.5 F-A - Testing metal alloy
4.5.1 in ALL-2
Selecting metal alloy (ALL-2: 2-component alloy;
ALL-3: 3-component alloy)
4.5.2 d1 - Density of the main metal in an alloy
4.5.3 d2 - Density of the subsidiary (secondary) metal in an alloy
4.5.4 d3 - Density of the subsidiary (third) metal in an alloy
4.5.5 rtA 5 : 5 % ratio of subsidiary metal in an alloy
P5 othr - Other parameters
5.1 bL Auto Backlight function (power supply from mains)
5.2 bLbt 70 Backlight function (power supply from batteries)
5.3 bEEP YES Beep sound on pressing keys
5.4 t1 Auto Power save – balance switch off if not operated
5.5 CHr6 YES Battery charging mode
P6 CAL User adjustment
6.1 St_u - Determining start mass
6.2 uCAL - Balance adjustment
- 14 -