User manual

Caution:
Tarring cannot be carried out when a negative or zero value is being
displayed. In such case message <Err3> appears on the display and short
audible signal is emitted.
16.4.2. Inserting tare value
The balance enables manual inserting of tare value. While in weighing
mode press:
• simultaneously and keys,
• the display indicates:
• Using and keys set tare value,
• Press
key,
• The software returns to weighing mode. The inserted tare value is
visible on the display with “–” sign,
• Tare can be inserted anytime in weighing mode.
Caution:
It is not possible to insert a new tare value if tare value is already set in
balance’s memory and it is greater than zero. In such case, the display
indicates an error <Err3> message and a short audible signal is emitted.
- 36 -