User manual

16.8.1. Mode’s local settings
Local settings of MODE P are grouped in submenu <P4.4.F-P>:
No.
Parameter
name
Default
settings
Description
4.4 F–P P-1
Testing platinum alloy – alloy selection
(P-1: platinum / nickel; P-2: platinum / palladium)
16.8.2. Table of platinum alloy density
The table contains the density values of subsidiary components in an alloy
with regards to platinum class in a tested sample:
Density of metal alloy [g/cm
3
]
Platinum
class [PT]
% content
Nickel Palladium
Range of sample
density [g/cm
3
]
1000 100 / 100 21.45 21.45 21.24 ~ 21.66
950 95.0 / 100 20.04 20.64 19.84 ~ 20.85
900 90.0 / 100 18.80 19.88 18.61 ~ 20.08
850 85.0 / 100 17.71 19.18 17.53 ~ 19.38
800 80.0 / 100 16.73 .18.53 16.56 ~ 18.72
750 75.0 / 100 15.86 17.92 15.70 ~ 18.10
16.8.3. Testing procedure
• Select working mode <mode P
> in accordance with point 16.1 of this
user manual, after which the main window of selected working mode is
displayed:
• If measurement result is other than zero press key (balance
zeroing).
- 42 -