User manual

Example of that can be very slow loading of pan (e.g. load pouring ), in
such case correction of zero indication can also correct indication of real
load mass.
Procedure:
• Enter to submenu <P1. rEAd> according to point 12.2 of manual,
and next:
AUTO no - autozero off
AUTO YES - autozero on
Return to weighing:
See – point 12.2.2. – return to weighing.
15. SETTING PARAMETERS OF RS 232
Peripheral device connected to RS 232C socket has to powered from the
same mains, with common antishock protection, in such a way that
different potentials must not appear on zero wires of the scale and the
peripheral device.
- 15 -