User manual

Transmission parameters programmed in scale:
• Transmission baud rate - from 1200 to 57600 bit/s
• Data bits - 8
• Stop bit - 1
• Parity control - none
Value indicated by scale display can be sent through port in series to
peripheral device in one of three ways:
• Manual – after pressing key
,
• In continuous way – after function activation or after sending
control command,
• On request from peripheral device – see point 21.2. of manual.
15.1. Printout type
Parameter enables to choose printout type.
Procedure:
• Enter to submenu <P2. Prnt> according to point 12.2 of manual,
and next:
- 16 -