User manual

21.3. Response message format
After sending a request message you can receive:
XX_A CR LF
command accepted and in progress
XX_D CR LF
command completed (appears only after XX_A)
XX_I CR LF
command comprehended but currently not accessible
^ CR LF
command comprehended but max range was exceeded
v CR LF
command comprehended but min range was exceeded
ES_CR LF
command not comprehended
XX _ E CR LF
error while executing command – time limit for stable result
exceeded (limit time is a descriptive parameter of the scale)
XX - command name
_ - space
21.4. Commands description
21.4.1. Scale zeroing
Syntax: Z CR LF
Possible responses:
Z_A CR LF
Z_D CR LF
- command accepted and in progress
- command completed
Z_A CR LF
Z_^ CR LF
- command accepted and in progress
- command comprehended but zero range exceeded
Z_A CR LF
Z_E CR LF
- command accepted and in progress
- time limit for stable result exceeded
Z_I CR LF
- command comprehended but currently not accessible
21.4.2. Scale tarring
Syntax: T CR LF
Possible responses:
T_A CR LF
T_D CR LF
- command accepted and in progress
- command completed
- 26 -