User manual

21.6. Continuous transmission
Indicator has possibility of mass printout in continuous transmission.
Transmission mode can be switched on with command through RS232
port (see point 21.4 of manual) or by parameter setting
(see point 15.1 of manual).
Frame format for continuous transmission:
1 2 3-11 12 13-18 19 20-27 28 29
stability
mark
mark mass space price space charge CR LF
Stability mark
[space] if result is stable
[?] if result is unstable
Mark
[space] for positive values
[-] for negative values
Mass
9 marks with point equalized to the right
Price
6 marks equalized to the right
Charge
8 marks equalized to the right
Example 1:
_ _ _ _ _ 2 5 . 0 0 0 _ 9 9 9 . 9 9 _ 2 4 9 9 9 . 7 4 CR LF
- continuous printout generated from scale.
Example 2:
? _ _ _ _ 3 2 . 1 1 0 _ _ 3 8 . 5 5 _ _ 1 2 3 7 . 8 4 CR LF
- continuous printout generated from scale.
Example 3:
? - _ _ _ 1 8 . 2 7 5 _ _ 1 5 . 0 0 _ _ _ _ _ 0 . 0 0 CR LF
- continuous printout generated from scale.
Notice:
If during manual print occurs an error of exceeding weighing range on [+],
scale will generate frame: ^ CR LF. However if during manual print occurs
an error of exceeding weighing range on [-], scale will generate frame: v
CR LF.
- 30 -