User manual

G. In case of failure, immediately disconnect scale power supply;
H. Devices that are to be withdrawn from usage should be utilized
according to the law.
I. On finish of working day, turn off the scale with switch .
additionally, for safety and power saving purposes, unplug the scale
from A/C mains.
J. Dead batteries (accumulators) should be utilized according to the
law;
3. WARRANTY CONDITIONS
A. RADWAG is obliged to repair or change those elements that
appears to be faulty because of production and construction reason,
B. Defining defects of unclear origin and outlining methods of
elimination can be settled only in participation of a user and the
manufacturer representatives,
C. RADWAG does not take any responsibility connected with
destructions or losses derives from non-authorized or inappropriate
(not adequate to manuals) production or service procedures,
D. Warranty does not cover:
• Mechanical failures caused by inappropriate maintenance of the
device or failures of thermal or chemical origin or caused by
atmospheric discharge, over voltage in mains or other random
event,
• Inappropriate cleaning.
E. Loss of warranty appears after:
• Access by an unauthorized service,
• Intrusion into mechanical or electronic construction of
unauthorized people,
• Removing or destroying protection stickers.
F. The detailed warranty conditions one can find in warranty certificate.
G. Contact with the central authorized service: [phone] ext.
114.
- 4 -