User manual
- 10 -
Fig. 1.The components for assembling a balance XA/2X series
On placing the balance in its intended place of use, assembly all of the components which
come standard with the balance:
• a bottom metal shield (4) of the weighing chamber
• bottom ring (3)
• a regular weighing pan (1)
• weighing pan shield (2)
On assembling the components and connecting the peripheral equipment, plug the
balance to mains using the power adapter delivered to you with the balance.
Before weighing filters, it is necessary to disassemble the weighing chamber components,
including: weighing pan shield (2), regular weighing pan (1) and the bottom ring (3). Then,
place a glass shield in the weighing chamber, and fit a weighing pan / stand dedicated for
weighing filters. On assembling, zero / tare balance indication. The balance is ready to
carrying out weighing process of filters.
CAUTION:
Make sure all of the above listed activities are carried out gently and carefully, and
careless actions may cause damage to balance’s measuring mechanism.