Owner's manual

EXI-02-03-06-14-GB
- 9 -
5.2. Cleaning
Cleaning may take place only after prior disconnection of the power
supplier from mains 230V AD and from the device it is connected to. It
should be cleaned only by means of substances and cloths that prevent
accumulation of electrostatic charges. It is forbidden to use abrasives or
solvents in order to protect the casing against damage.
6. TECHNICAL DATA
• Uo
= 8,61 V.
• Io
= 0,24 A
• Po
= 0,52 W
• Um = 255 V
• Lo = 200uH
• Co = 5,7uF
• Li ≈ 0
• Ci ≈ 0
• Working temperature: -20
o
C ÷ 40
o
C
• Plastic casing
• IP 3X
• Dimensions 107 x 71 x 57
• Gross net with 20m of supply cable and connectors about 1kg
• Supply cable of 20m length terminated with M12 4 pin connector