Installation Guide

Table Of Contents

FinMInstallationGuide Release4.5.25 2‐18

TBSAntennas SiteInstallation

1. Whenmountingonathinpole,positionthepoleclampasshowninthefollowingfigures:

2. Placethis“unit”onthepolewhereyouwanttomounttheantenna.Onceitisin

place,rotatethepoleclampasshown,thentightenbothbolts.

MediumPole

ThismethodisformountingtheTBSantennaonapoleofpipesize2to3in.

3. Connectthepoleclamptotheradioholderwiththe8x90bolts,butdonottighten

theboltsalltheway‐tightenthemsothattheyarenotcloserthanadistance

DonotmounttheTBSantennaonapolesmallerthan3/4in.

Figure2‐37:ConnectPoleClamptoRadio

Holder

Figure2‐38:Tightenbolts

Figure2‐39:RotateClampandtightenbolts Figure2‐40:MountingKitonthinpole