Installation Guide

FinMInstallationGuide Release4.5.25 2‐45
PoEfortheTMU SiteInstallation
c. PlaceTMUoverthepinsontherightsideofthedrawerasshown,andat tachusing
hex(Allen)screws.
Figure2‐84:AttachingTMUtodrawer
2.3.3PoEfortheTMU
Theunitscanbemountedina19inrack,ashelf,oronawall.
MountingwiththeTMU‐PoEdrawer
TheTMU‐PoEdrawercanbeusedtomountboththeTMUandthePoE.Followthe
instructionsin“TMUMountingUsingtheTMU‐PoEDrawer”onpage2‐36.
MountingonaDINrail
CarryoutthefollowingstepstomountthePoEonaDINrail:
TheTMUandPoE,whenmountedintheTMU‐PoEdrawer,aregroundedviathe
mountingpins,throughthe19inrack.
Makesuretherackyouareusingisgroundedproperly.