User's Manual

5250 – 5350 MHz band – FCC/IC
The maximum output power can be set as follows, when operating in the 5.3 GHz band. The
total EIRP limit is 30 dBm.
5 MHz: 14.0 dBm
10 MHz: 16.0 dBm
20 MHz: 19.0 dBm
40 MHz: 19.0 dBm
80 MHz: 19.0 dBm
5470 – 5725 MHz band – FCC/IC*
The maximum output power can be set as follows, when operating in the 5.3 GHz band. The
total EIRP limit is 30 dBm.
5 MHz: 14.0 dBm
10 MHz: 17.0 dBm
20 MHz: 19.0 dBm
40 MHz: 19.0 dBm
80 MHz: 19.0 dBm
4940 – 4990 MHz band - FCC/IC
The maximum output power can be set as follows, when operating in the 4.9 GHz band,
under FCC and IC. The power values shown below are for systems using 0 to 26 dBi total
antenna assembly gain. Systems using 29 dBi antenna gain must reduce output power by 3
dB.
5 MHz: 26.97 dBm
10 MHz: 27.41 dBm
20 MHz: 28.24 dBm
Radio parameters accessed by end-user
The following parameters can be accessed by user:
1. Output Power
2. Frequency channel
3. Channel bandwidth
4. Antenna gain in external antenna type device
* Under IC regulations the 5600-5650 MHz band is excluded from operation
AP0158770 Reference Guide 3