User's Manual

Overview
The ‘SU Pro, SU Air’ is an Outdoor Subscriber Radio Unit operating in the 4.9 – 5.8 GHz
frequency bands. It is a TDD OFDM radio supporting 10 MHz, 20 MHz, 40 MHz and 80 MHz
channel bandwidths. The 2.4 GHz WiFi interface supports standard 802.11/n HT-20, HT-40
operation modes.
It supports cross polarized 2x2 MIMO antenna configuration for PtP and PtMP systems. The
‘SU Pro, SU Air’ also features an on-board WiFi 2.4 GHz interface module for short range
control purposes. The ‘SU Pro, SU Air’ is powered by a 24Vdc PoE device.
The ‘SU Pro, SU Air’ is certified with the FCC ID: Q3K-5XACULC and IC: 5100A- 5XACULC.
Condition of Use
The ‘SU Pro, SU Air’ is a proprietary radio device and can only be deployed and maintained
by RADWIN professional installers or its authorized subcontractors
FCC rules and IC Regulation Restrictions
The ODU firmware is factory programmed to operate under the FCC rules and Industry
Canada regulation restrictions. The firmware is locked and inaccessible by any third party.
As a result of the above the user interface allows both the installer and the user to control
the ODU only within the boundaries of the regional restrictions.
Antennas
The ‘SU Pro, SU Air’ is certified with a 17 dBi integrated flat crossed dual pole antenna type
covering both Point-to-Point and Point-to-Multipoint systems.
Certified Antenna
Following are the antennas certified for use with the ‘SU Pro, SU Air’:
Antenna Type
Manufacturer
Model
Number
Frequency
Range
Antenna Max
Gain (dBi)
Dual Pole
Integrated
RADWIN Ltd.
MP0188280
4940-4990
14
5150-5350
16
5470-5725
17
5725-5850
16
Omni
RADWIN Ltd.
On-Board
2400-2483.5
3
SU Pro, SU Air Reference Guide 1