User's Manual

Maximum Output Power
5725 – 5850 MHz band - FCC/IC
The maximum output power can be set as follows, when operating in the 5.8 GHz band,
under FCC 47 CFR Part 15.407 New Rules and IC RSS-247 regulations. The power values
are for PtP systems and PtMP systems. For PtMP systems the total EIRP is limited to 36
dBm. Therefore the output power of these systems will be reduced to comply with 36 dBm
EIRP limit.
The highest conducted output power shall be limited to 29 dBm in all channel bandwidths
4940 – 4990 MHz band - FCC/IC
The maximum output power can be set as follows, when operating in the 4.9 GHz band,
under FCC 47 CFR Part 90Y Rule and IC RSS-111 regulations.
10 MHz: 21.0 dBm
20 MHz: 21.0 dBm
5150 – 5250 MHz band – FCC
The maximum output power can be set as follows when transmitting in the 5.1 GHz band,
under FCC 47 CFR Part 15.407 New Rules and regulations.
The total EIRP limit for PtP applications is 45 dBm.
The total EIRP limit for PtMP applications is 36 dBm.
The total EIRP limit for PtMP applications when transmitting at elevations above 30° relative
to the horizon is 21 dBm.
10 MHz: 26.0 dBm
20 MHz: 28.0 dBm
40 MHz: 28.0 dBm
80 MHz: 29.0 dBm
2400 – 2483.5 MHz band - FCC/IC
The maximum output power can be set as follows, when operating in the 2.4 GHz band,
under FCC 47 CFR Part 15.247 and IC RSS-247 regulations. The power values are for Wi-Fi
systems for HT-20 and HT-40 Channel BW.
The highest conducted output power shall be limited to 26 dBm in all channel bandwidths
Channel Bandwidths and Frequency Range
SU Pro, SU Air Reference Guide 2
Channel BW
[MHz]
Center Freq. Range
[MHz]
10
5730 - 5845
20
5735 - 5840
40
5745 - 5825
80
5765 - 5810
10
4945 - 4985
20
4950 - 4980
10
5160 - 5245
20
5165 - 5240
40
5170 - 5230
80
5190 - 5210
20
2412 - 2462
40
2422 - 2452