User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 4 Configuration
2. Select which site to backup.
The configuration dialog box opens.
3. Click Backup.
4. In the Save As dialog box, indicate in which folder and under what
name configuration file is to be saved, and click Save.
Restoring a Configuration File
Configuration files (*.ini) can be uploaded from the management
station. Verified configuration files can be distributed to other units
that use the same configuration.
Æ
To restore a configuration file:
1. From the Configuration menu, select the site to reconfigure.
The Configuration dialog box opens.
2. Click Restore.
3. From the Open dialog box select *.ini file to upload and click OK.
4.17 Reinstalling the Link
It may be necessary to reinstall the link if the ODUs should need to be
realigned.
Reinstalling the link causes both sites to go into install mode.
Not
e
Æ
To reinstall the link:
1. Click Configuration in the Menu bar and select any one of the sites.
The Configuration dialog box opens.
2. Click the Install Mode button in the Configuration dialog box.
A message box asking if you want to enter install mode appears.
3. Click Yes to continue.
WinLink 1000 enters install mode and the beeper starts beeping.
4. Realign the ODUs and complete the Installation wizard (see
Chapter2 ).
Reinstalling the Link 4-35