User's Manual Part 1

Chapter 4 Configuration WinLink 1000 Installation and Operation Manual
4.18 Resetting WinLink 1000
Resetting the link causes service disconnection.
In order to maintain the link configuration, reset the remote WinLink
1000 first
.
Note
Æ
To reset WinLink 1000:
1. From Maintenance, reset the remote WinLink 1000.
2. From Maintenance, reset the local WinLink 1000.
Æ
To reset to Factory Defaults
1. Click Configuration in the Menu bar and select any one of the sites.
The Configuration dialog box opens.
2. Select Operations in the Configuration dialog box.
3. Click the Restore Defaults button.
A message box asking if you want to restore factory default
appears.
4. Click the check box if you want to keep the current IP settings.
5. Click Yes to continue.
4.19 Displaying the Inventory
Æ
To view the inventory data
1. Click Configuration from the main menu.
2. Select which site to configure.
The configuration dialog box opens.
3. Select Inventory (
Figure 4-19 ).
Note
This screen is for viewing purpose only. s
4-36 Displaying the Inventory