User's Manual Part 1

Chapter 1 Introduction WinLink 1000 Installation and Operation Manual
Versions
WinLink 1000 is available in several different frequency ranges, with
versions for ETSI and FCC regulations;
• F23, 2.300–2.400 GHz
• F24, 2.400–2.4835 GHz
• F25, 2.496–2.690 GHz
• F49, 4.940–4.990 GHz
• F53, 5.250–5.350 GHz
• F54, 5.470–5.725 GHz
• F58, 5.725–5.850 GHz
• F59, 5.865–5.935 GHz
Several special systems are also available;
• WL1000-AIND, All Indoor unit, F58/FCC with 4T1 support.
WL1000-AIND integrates the ODU and the IDU-C into a single 19"
IDU-C box.
• WL1000-ACCESS, Ethernet only units powered over the Ethernet via
PoE unit. Available in F23, F24, or F58 frequency ranges.
• WL1000-ACCESS-CL, ODU is equipped with special hardware for
the collocation of several units, using a method called Hub Site
Synchronization (HSS).
For the full product range see the latest WinLink 1000 brochure on our
website.
Features
Wireless Link
WinLink 1000 delivers up to 48 Mbps air rate for Ethernet and E1/T1
traffic. The system supports a variety of spectrum bands and can be
configured to operate in any channel in the band with a carrier step
resolution of 5, 10, or 20 MHz (2.x GHz versions support TDM at 10 or
20 MHz only).
WinLink 1000 operation complies with ETSI, CSA, CN, UK, and the FCC
47CFR Part 15 and subpart C and E requirements.
1-2 Overview