User's Manual Part 1

Chapter 2 Installation and Setup WinLink 1000 Installation and Operation Manual
3. Connect the ODU cable to the RJ-45 connector on the IDU
designated ODU or WAN. The figures below illustrate typical IDU
panels. You may have differences in your panels depending on the
hardware ordered.
Figure 2-2. Typical IDU-E Rear Panel
Figure 2-3. IDU-2E1-AL Rear Panel
Figure 2-4. Typical IDU-C Front Panels
Figure 2-5. WinLink 1000-AIND All Indoor Radio Unit
•
The panels may be fitted with different connector combinations than
shown, depending on the model ordered.
Note
2-6 Connecting the ODU to the IDU