User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 2 Installation and Setup
Figure 2-13. Installation Wizard, System dialog box
12. Enter a SSID (System ID). The SSID must include at least eight
alphanumeric characters. Up to 24 characters are allowed.
•
Note
Both sides of a link must have the same SSID number for data
transmission to take place.
13. Enter a Link Name for the link identification.
14. Enter a name for site 1.
15. Enter a name for site 2.
16. Enter the Link Password (version 1.400 and after). See
Changing the
Link Password
for details on the Link Password.
•
No
te
It the Link Password is incorrect a link is established but configuration
cannot be performed and no services are available. A new link
password may be obtained from Technical Support or use the
Installing the Link 2-17