User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 2 Installation and Setup
Figure 2-14. Channel Select dialog box - Automatic Channel Select
1. Select the main frequency from the Installation Channel menu.
2. Select the required Channel Bandwidth 5, 10, or 20 MHz. Default is
20 MHz.
When changing the channel bandwidth WinLink 1000 repeats
evaluation of the link.
Not
e
ACS is disabled if 5 or 10 MHz steps are selected.
F2.x GHz versions with TDM services operate at 10 or 20 MHz steps
only.
Ethernet Only also suppor s 5 MHz bandwidth. t
3. Click the check box if Automatic Channel Selection is required.
4. Click the check boxes in the Available Channels List of all the
allowable channels that can be automatically selected.
Installing the Link 2-19