User's Manual Part 1

Chapter 2 Installation and Setup WinLink 1000 Installation and Operation Manual

Figure

2-17. TDM Parameters dialog box

•

This dialog box is available only with IDU-E units, it is activated a ter

TDM service was chosen in the previous Service dialog box. In Ethernet

only services, the TDM dialog box does not appear.

Note

Setting the T1 Line Code

The T1 line code can be set as B8Zs or AMI in the TDM Parameters

dialog box.

The default is B8ZS.

To change the line code

• In the TDM Parameters dialog box, set the line code to B8ZS or AMI.

Setting the TDM Backup

IDU-R units have two E1 trunk lines, one for WinLink 1000 air interface

via the ODU, and the second external equipment such as a PBX. The

TDM backup screen is displayed in IDU-R systems only.

2-26 Installing the Link