User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 4 Configuration

Figure

4-4. Channel Select dialog box (DFS, ETSI requirement)

The sign on the configuration Wizard and Status bar indicates that

the radar detection is on.

To define automatic channel selection in the 5.4 ETSI version

1. Select the main frequency from the Operating Channel menu.

Note

Automatic Channel Selection is selected by default.

2. Click at least two check boxes in the Available Channels List of all

the allowable channels that can be automatically selected.

Note

Installation will not continue until at least two channels are defined.

Selecting a new channel causes the system quality to change. The

quality bar shows the adjustment until the system finds the best

quality link.

Any channel selected is evaluated for 60 seconds; therefore this

selection process may take a few minutes.

Selecting Channels 4-7