User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 4 Configuration

Table

4-2. Typical Transmit Power Limits

Regulation Version Min Tx

[dB]

Max Tx

[dB]

MaxTx at

36 Mbps

[dB]

MaxTx

48 Mbps

[dB]

Power

Control

F58 4 16 14 10 Yes

F58/EXT 4 16 14 10 Yes

F49 14 15 15 14 No

F53 -3 8 8 8 Yes

F53/EXT 3 3 3 3 No

F24 18 18 18 18 No

FCC

F53HP 10 16 14 10 Yes

F54 2 8 8 8 Yes

F54/ETSI 2 8 8 8 Yes

ETSI

F54-

HG/EXT

-3 3 3 3 Yes

4.7 Defining the Management Addresses

Each site must be configured separately, first site A then site B.

To define the Management Addresses:

1. Click Configuration from the main menu.

2. Select which site to configure.

The Configuration dialog box opens.

3. Select Management (see

Figure

4-12

4. Enter the IP address of the ODU in the IP address field.

Note

If performing configu ation from the WinLink manager, the IP address

is entered in the login screen (

Figure 2-4)

5. Enter the Subnet Mask.

6. Enter the Default Gateway.

Defining the Management Addresses 4-21