User's Manual

WinLink User and Installation Guide Version 1.795 5-73
Figure 5-11: Configuration Dialog Box
3. Select the appropriate item in the left hand list to open a dialog
box.
4. Click Apply to save changes.
Changing the Transmit Power
Each site can have a different transmit power level.
Æ To change the Transmit Power:
1. Click Configuration from the main menu.
2. Select which site to configure.
The Configuration dialog box opens.
3. Select Air Interface. (See
Figure 5-12 )
4. Select the required Transmit Power Level. For available power
limits for each system, see
Product Specification Table, page I-160.
5. Click Apply to save the changes.