User's Manual

WinLink User and Installation Guide Version 1.795 5-75
Figure 5-13: Management Addresses - Site Configuration dialog box
3. Select Management.
4. Enter the IP address of the ODU in the IP address field.
Note:
If performing configuration from the WinLink™ 1000 Manager, the IP
address is entered in the login screen.
5. Enter the Subnet Mask.
6. Enter the Default Gateway.
7. Enter the Trap Destination. This is the IP address of the PC running
the management application. The event log will be stored at this
address.
8. Click Apply to save the changes.
Configuring VLAN Settings
VLAN Management enables separation of user traffic from NMS Traffic.
The user decides if such a separation is required. Both the HQ and
Remote site are configured with VLAN Management.