User's Manual

Chapter 4 Configuration WinLink1000 Installation and Operation Manual

4.15 Setting External Alarm Inputs

The IDU-C has two external alarm inputs in the form of dry-contact

relays. The Alarm interface is located on the front panel of the IDU-C

and is a 9-pin D-type female connector, see

Appendix A

for the

pinout. The user enables or disables each of the alarms and can

configure the text that appears in the alarm trap. The ODU sends the

alarm within less than a second from actual alarm trigger.

To set the external alarm inputs:

1. Open the Site Configuration Alarms configuration by clicking

Configuration > Advanced.

Figure

4-20. External Alarm Configuration

2. Enter a description of the alarms in the fields.

3. Click Apply to save.

4-32 Setting External Alarm Inputs