User's Manual

Chapter 4 Configuration WinLink1000 Installation and Operation Manual
The Configuration dialog box opens.
5. Click the Install Mode button in the Configuration dialog box.
A message box asking if you want to enter install mode appears.
6. Click Yes to continue.
WinLink1000 enters install mode and the beeper starts beeping.
7. Realign the ODUs and complete the Installation wizard (see
Chapter2 ).
4.18 Resetting WinLink1000
Resetting the link causes service disconnection.
In order to maintain the link configuration, reset the remote
WinLink1000 first
.
Note
Æ
To reset WinLink1000:
1. From Maintenance, reset the remote WinLink1000.
2. From Maintenance, reset the local WinLink1000.
Æ
To reset to Factory Defaults
1. Click on Configuration in the Menu bar and select any one of the
sites.
The Configuration dialog box opens.
2. Select Operations in the Configuration dialog box.
3. Click the Restore Defaults button
A message box asking if you want to restore factory default
appears.
4. Click the check box if you want to keep the current IP settings.
5. Click Yes to continue.
4.19 Displaying the Inventory
Æ
To view the inventory data
1. Click configuration from the main menu.
4-34 Displaying the Inventory