User's Manual

WinLink1000 Installation and Operation Manual Chapter 4 Configuration
Figure 4-10. TDM clock dialog box for E1 IDU
If TDM services are selected then the TDM parameters dialog box
appears.
The TDM Parameters dialog box contains five working modes; select
the appropriate clock mode according to your application. Choosing
one of these modes sets the TDM clock behavior on both sides of the
link. The user equipment must be configured as described
Table 4-1 .
Table 4-1. TDM Clock Modes
Unit clock mode User equipment side
Local Unit Remote Unit HQ side Branch side
1 Transparent Transparent Internal/Recov
er
Internal/Recov
er
2 Loop Time Recover Internal Recover
3 Recover Loop Time Recover Internal
Setting the Clock Configuration 4-15