User's Manual

Appendix D
AIND Antenna Alignment
Procedure
Use this procedure when using the all indoor system WinLink1000-
ANID or manually aligning two WinLink1000 units.
To achieve the best benefit and link budget from the WinLink
installation, the link antennas must be aligned; the two antennas
should exactly face each other.
In order to achieve the best performance, the line of sight must be as
clear as possible with no obstructions between the two sites.
Prior to attempting WinLink alignment, install the hardware and
software in accordance with the WinLink1000 Installation and
Operation Manual.
Figure D-1 shows the link setup. At least two
people are needed to perform the alignment procedures.
Once the alignment is complete, you are able to evaluate the quality of
the link.
Site A
Site B
AirMux
IDUx
IDUx
Figure D-1. WinLink1000 Link Setup
Expected Signal Level D-1