User's Manual

Chapter 4 Configuration WinLink1000 Installation and Operation Manual
Figure 4-12. Configuration Link, Finish screen
5. Click Finish to complete the configuration wizard.
The Main screen is displayed.
4.7 Changing the Transmit Power
Each site can have a different transmit power level.
Æ
To change the Transmit Power:
1. Click Configuration from the main menu.
2. Select which site to configure.
The Configuration dialog box opens.
3. Select Air Interface. (See
Figure 4-13 )
4. Select the required Transmit Power Level. Table
4-2 shows the
available power limits for each WinLink1000 system.
4-18 Changing the Transmit Power