User's Manual

Chapter 4 Configuration WinLink1000 Installation and Operation Manual

Table

4-2. Typical Transmit Power Limits

Regulation Version Min Tx

[dB]

Max Tx

[dB]

MaxTx at

36 Mbps

[dB]

MaxTx

48 Mbps

[dB]

Power

Control

F58 4 16 14 10 Yes

F58/EXT 4 16 14 10 Yes

F49 14 15 15 14 No

F53 -3 8 8 8 Yes

F53/EXT 3 3 3 3 No

F24 18 18 18 18 No

FCC

F53HP 10 16 14 10 Yes

India F58CN -1 10 10 10 Yes

China F24/EXT/ET

-4 -4 -4 -4 No

F54 2 8 8 8 Yes

F54/ETSI 2 8 8 8 Yes

ETSI

F54-

HG/EXT

-3 3 3 3 Yes

4.8 Defining the Management Addresses

Each site must be configured separately, first site A then site B.

To define the Management Addresses:

1. Click Configuration from the main menu.

2. Select which site to configure.

The Configuration dialog box opens.

3. Select Management (see

Figure

4-14

4. Enter the IP address of the ODU in the IP address field.

Note

If performing configu ation from the WinLink manager, the IP address

is entered in the login screen (

Figure 2-4)

4-20 Defining the Management Addresses