User's Manual

WinLink1000 Installation and Operation Manual Chapter 1 Introduction
WL1000-ODU/F24/HP/EXT
WL1000-ODU/F49/FCC/EXT
WL1000-ODU/F53/ETSI/EXT
WL1000-ODU/F53/FCC/EXT
WL1000-ODU/F53/FCC/INT
WL1000-ODU/F53/HP/EXT
WL1000-ODU/F53/HP/INT
WL1000-ODU/F54/ETSI/EXT
WL1000-ODU/F54/ETSI/INT
WL1000-ODU/F54/ETSI-HG/EXT
WL1000-ODU/F54/ETSI-LG/EXT
WL1000-ODU/F54/HP/EXT
WL1000-ODU/F54/HP/INT
Features
Wireless Link
WinLink1000 delivers up to 48 Mbps data rate for Ethernet and E1/T1
traffic. The system supports a variety of spectrum bands and can be
configured to operate in any channel in the band with a carrier step
resolution of 5 MHz.
WinLink1000 operation complies with ETSI, CSA and the FCC 47CFR
Part 15 and subpart C and E requirements.
WinLink1000 employs Time Division Duplex (TDD) transmission. This
technology simplifies the installation and configuration procedure.
There is no need to plan and to allocate separate channels for the
uplink and downlink data streams.
Operation over 2.4 GHz and 5.x GHz bands is not affected by harsh
weather conditions, such as fog, heavy rain etc.
Overview 1-3